VS8 Hex-end Swivel Sleeve with Internal Thread End and M5 External Threads - 4mm rope

VS8 Hex-end Swivel Sleeve with Internal Thread End and M5 External Threads - 4mm rope

Stock Status: Available for order, please allow approximately one working week for delivery.
Your message is too long. It must be less than 255 characters.
£25.75 (inc VAT)


Hex-end swivel sleeve with M5 right-hand internal thread and VISSLINE external thread, M5 x 30, check nut.

Attach to tubular or rectangular steel horizontal members. Requires: Rivet setting tool.
This assembly is easily tensioned by turning the hex part of the stainless steel swivel sleeve.
A quick and convenient assembly, allowing easy attachment to the inside face of a hollow steel post.  Particularly useful at corner posts where two ropes, passing through the ropes at right-angles would otherwise conflict with each other.

Minimum assembly length - 500mm
Maximum assembly length - 1200mm**


*Measurements must be accurate from the end of external thread to the end of external thread, as shown in the picture above.
**We can fabricate to any length, but currently not available online. Please contact us where a different dimension is required.


Information & Specification
Material: AISI 316
DOWNLOADS: Specification Sheet: CAD
DXF
 
Nr. DXF a b1 b2 b3 c1 c2 ø d1 ø d2 ø d3 ø d4 k1 k2 sw1 sw2 Weight
20820-0008 DXF M5 42 23 4.5 30 7 4.4 8.8 12.7 6.8 4 6 8 11 0.064

Technical Specifications

  • Rope Diameter
    4mm
  • Thread Size
    M5
  • Fitting
    Swivel Sleeve
  • Rope Type
    7x7 (6x7 + WC)
  • Brand:
    Jakob

Customer Reviews

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product