Swageless Rope Fittings / Self-Fit

Swageless Ends are ideal when you are in a hurry or cannot be sure of an accurate dimension for your wire rope assembly until installing.

To install a self-fit end, all you need to do is unscrew the body of the self-fit fitting, slide the rope through the hole in the smaller section, place the inserts inside as instructed and screw back together again.  
No unwinding of the rope is required, all you need is a spanner! All of our swageless fittings come with a pictorial instruction sheet.


Our Swageless Fittings conform to the highest standards and are SIMPLE to use. The strength of the fitting is not compromised, achieving the same strength as a swaged end. Jakob holds an ISO9001 certificate, so you can be assured of the highest quality.

If you would like to use a swageless end as part of a assembly select your 6x7 ropes and use a self fit end at both ends, or contact us and we can arrange for one end to be swaged and the other to be self-fit (this will save you some money).